Special hypoid gear oil 85W-140 GL-5
BOOST OIL Gear Oil 85W-140 GL-5 is made from carefully chosen base oils and additives that prevent tooth flank damage. The EP additives contained in the gear oil form a load-bearing lubricant film between the tooth flanks when the gears intermesh. It therefore prevents scoring even under extreme mechanical loads and significantly reduces abrasion wear. The gear oil is extremely ageing resistant, even under high thermal load. The good lowtemperature viscosity is achieved through the high degree of refining of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion.
BOOST OIL Gear Oil 85W-140 GL-5 does not cause damage to conventional sealing materials.
Properties
BOOST OIL Gear Oil 85W-140 GL-5 is primarily recommended for heavy-duty drive axle systems with hypoid gearing in commercial vehicles.
Service description
Specifications:
- API GL-5
- MIL-L-2105 C/D
Description
TYPICAL PARAMETERS | METHODS | UNITS | BOOST OIL Gear Oil 85W-140 GL-5 |
SAE-Klasse | DIN 51 757 | g/cm3 | 85W- 140 |
Density at 15°C | DIN EN ISO 12185 | kg/m3 | 0,910 |
Viscosity 40°C | DIN ISO 3104 | mm2/s | 415 |
Viscosity 100°C | DIN ISO 3104 | mm2/s | 27 |
Viscosity index (VI) | DIN ISO 2909 | – | 86 |
Flash point COC | DIN ISO 2592 | °C | 225 |
Pour point | DIN ISO 3016 | °C | -18 |
* meets the requirements of the OEM manufacturer. The stated values may vary within the usual commercial range.