Multi-purpose gear oil
Properties
BOOST OIL Gear Oil 80W-90 GL-4 is made from carefully chosen base oils and additives. The EP additives contained in the gear oil form a load-bearing lubricant film between the tooth flanks when the gears intermesh. This layer reduces abrasion on the tooth flanks during movement of the gears under high mechanical load. The gear oil is extremely ageing resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refining of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion.
BOOST OIL Gear Oil 80W-90 GL-4 does not cause damage to conventional sealing materials.
Use instructions
BOOST OIL Gear Oil 80W-90 GL-4 is recommended for use in manual transmissions, steering gears and axle drives in passenger and commercial vehicles (not suitable for hypoid gears).
Performance data
Specifications:
- API GL-4
- MIL-L-2105
Recommendations*:
- MB 235.1
- MAN 341 type Z2
- MAN 341 type E1
- Ford SQM-2C-9008 A
- ZF TE-ML 02B, 17A
Description
TYPICAL VALUES | METHOD | UNIT | BOOST OIL Gear Oil 80W-90 GL-4 |
SAE class | DIN 51 511 | – | 80W-90 |
Density at 15°C | DIN 51 757 | g/cm3 | 0.897 |
Viscosity at -12°C | DIN 51 398 | mm²/s | – |
Viscosity at -26°C | DIN 51 398 | mm2/s | 129.000 |
Viscosity at 40°C | DIN 51 562 | mm2/s | 114 |
Viscosity at 100°C | DIN 51 562 | mm2/s | 11.9 |
Viscosity index (VI) | DIN ISO 2909 | – | 92 |
COC flash point | DIN ISO 2592 | °C | 220 |
Pour point | DIN ISO 3016 | °C | -30 |
FZG test A/8.3/90 | DIN 51 354 | SKS | >12 |
* meets the requirements of the OEM manufacturer The above values may vary within commercially accepted tolerances