Hypoid gear oil
Properties
BOOST OIL Gear Oil 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent scoring even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely ageing resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refining of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion.
BOOST OIL Gear Oil 80W-90 GL-5 does not cause damage to conventional sealing materials.
Use instructions
BOOST OIL Gear Oil 80W-90 GL-5 is recommended for gear systems with hypoid or bevel gears in drive systems in passenger and commercial vehicles, motorbike drive systems and manual gearboxes, unless the use of an engine oil is prescribed.
Performance data
Specifications:
- API GL-5
- MIL-L-2105 C, MIL-L-2105 C/D
Recommendations*:
- MB 235.0
- MAN 342 type M-1
- Ford SQM-2C-9002 AA
- ZF TE-ML 16C, 17B, 19B, 21A
- Voith 3.325-339
- Volvo 97310
- DAF
Description
TYPICAL VALUES | METHOD | UNIT | BOOST OIL Gear Oil 80W-90 GL-5 |
SAE class | DIN 51 511 | – | 80W-90 |
Density at 15°C | DIN 51 757 | g/cm3 | 0.897 |
Viscosity at -12°C | DIN 51 398 | mm²/s | – |
Viscosity at -26°C | DIN 51 398 | mm2/s | 130.000 |
Viscosity at 40°C | DIN 51 562 | mm2/s | 140 |
Viscosity at 100°C | DIN 51 562 | mm2/s | 13.9 |
Viscosity index (VI) | DIN ISO 2909 | – | -98 |
COC flash point | DIN ISO 2592 | °C | -210 |
Pour point | DIN ISO 3016 | °C | -30 |
FZG test A/8.3/90 | DIN 51 354 | SKS | >12 |
* meets the requirements of the OEM manufacturer The above values may vary within commercially accepted tolerances